Curtains

Guide Specs for Model 850 Fold-Up & 810 Walk-Draw Curtains

Gym Divider Curtain shall be Model No. 850 Fold-up or (Model No. 810 Walk Draw)

  ___ wide x ___ high as manufactured by Fabri-Tech Inc.  All curtain materials shall be fire-rated as self-extinguishing and registered as approved by the California State Fire Marshal.  Test methods utilized are comparable to standards of UL-214 and NFPA-701 large scale.

Lower 8’0” section of curtain shall be polyester reinforced solid vinyl fabric 18oz. per square yard and contains anti-bacterial and fungi-resistant treatment to prevent mildew and rot.  All seams, outer edge hems and bottom pocket hem shall be electronically welded with 1” full contact weld.  Colors available:  Red, White, Dark Blue, Light Blue, Yellow, Green, Gray, Black, Maroon and Beige.

Upper section of curtain shall be VCP mesh woven vinyl encapsulated polyester yarns with a 50% plus open grid weave for air circulation.  Solid vinyl fabric strips 6” wide shall be welded to the VCP mesh at hoist line locations.  Solid vinyl fabric shall be welded to the top edge of the VCP mesh to form a pocket hem to accommodate a 1-5/8” diameter tube batten for curtain support.  VCP mesh colors available:  White, Yellow, Red and Dark Blue.

Specifications for Model 810 Walk-Draw Curtains   (pic top)

Track shall be heavy duty 14 ga. galvanized steel, 1-3/4” wide by 2” high.  Suspension spacing from building structure with beam clamps and hanger brackets shall not exceed 8’0” on center.

Carriers shall be bumper type with 1” diameter nylon tire ball bearing wheels.  Attachment to curtain shall be made with trim chain and S-hook to grommets spaced 12” on center.  Curtains shall be supplied with sufficient fullness (1/2” per foot of opening width) to easily extend the desired distance without excessive stretching.  Stack space for curtain shall not exceed 1-1/4” per foot of curtain width.  Optional tie-back strap is available to secure curtain against wall when not in use.

Specifications for Model 850 Fold-Up Curtains    (pic bottom)

Top Tube Batten supporting curtain shall be suspended from each drive pipe support assembly with adjustable 2/0 chain.  Curtain to be hoisted by 1/8” diameter steel aircraft cable.  Spacing shall not exceed 10’0” of the curtain width.  Each hoist line shall be attached to the 1-5/8” diameter steel tube batten in the bottom hem of curtain run through grommets vertically spaced 18” on center to the top of the curtain and terminate at the individual drum formed on the 2-3/8” diameter drive pipe shaft above the curtain.  Suspension of curtain in stored position shall not rely on one cable for support.

Electrical operation of the drive shaft shall consist of a compensating type power unit with a 3/4 H.P. 115 Volt, single phase reversible motor with built-in thermal overload protection.  Speed reduction to be through load holding worm on worm gears.  Remote control operation to include integral limit switch to control the upper and lower limit of curtain travel.  A security key lock, three position momentary contact wall switch shall be furnished with flush type cover plate.  Key switch to be located so that operator has full view of the curtain while it is being operated.  Wireless remote control unit optional.

Guide Specs for Model 850 Fold-Up & 810 Walk-Draw Curtains

Gym Divider Curtain shall be Model No. 850 Fold-up or (Model No. 810 Walk Draw)

  ___ wide x ___ high as manufactured by Fabri-Tech Inc.  All curtain materials shall be fire-rated as self-extinguishing and registered as approved by the California State Fire Marshal.  Test methods utilized are comparable to standards of UL-214 and NFPA-701 large scale.

Lower 8’0” section of curtain shall be polyester reinforced solid vinyl fabric 18oz. per square yard and contains anti-bacterial and fungi-resistant treatment to prevent mildew and rot.  All seams, outer edge hems and bottom pocket hem shall be electronically welded with 1” full contact weld.  Colors available:  Red, White, Dark Blue, Light Blue, Yellow, Green, Gray, Black, Maroon and Beige.

Upper section of curtain shall be VCP mesh woven vinyl encapsulated polyester yarns with a 50% plus open grid weave for air circulation.  Solid vinyl fabric strips 6” wide shall be welded to the VCP mesh at hoist line locations.  Solid vinyl fabric shall be welded to the top edge of the VCP mesh to form a pocket hem to accommodate a 1-5/8” diameter tube batten for curtain support.  VCP mesh colors available:  White, Yellow, Red and Dark Blue.

Specifications for Model 810 Walk-Draw Curtains   (pic top)

Track shall be heavy duty 14 ga. galvanized steel, 1-3/4” wide by 2” high.  Suspension spacing from building structure with beam clamps and hanger brackets shall not exceed 8’0” on center.

Carriers shall be bumper type with 1” diameter nylon tire ball bearing wheels.  Attachment to curtain shall be made with trim chain and S-hook to grommets spaced 12” on center.  Curtains shall be supplied with sufficient fullness (1/2” per foot of opening width) to easily extend the desired distance without excessive stretching.  Stack space for curtain shall not exceed 1-1/4” per foot of curtain width.  Optional tie-back strap is available to secure curtain against wall when not in use.

Specifications for Model 850 Fold-Up Curtains    (pic bottom)

Top Tube Batten supporting curtain shall be suspended from each drive pipe support assembly with adjustable 2/0 chain.  Curtain to be hoisted by 1/8” diameter steel aircraft cable.  Spacing shall not exceed 10’0” of the curtain width.  Each hoist line shall be attached to the 1-5/8” diameter steel tube batten in the bottom hem of curtain run through grommets vertically spaced 18” on center to the top of the curtain and terminate at the individual drum formed on the 2-3/8” diameter drive pipe shaft above the curtain.  Suspension of curtain in stored position shall not rely on one cable for support.

Electrical operation of the drive shaft shall consist of a compensating type power unit with a 3/4 H.P. 115 Volt, single phase reversible motor with built-in thermal overload protection.  Speed reduction to be through load holding worm on worm gears.  Remote control operation to include integral limit switch to control the upper and lower limit of curtain travel.  A security key lock, three position momentary contact wall switch shall be furnished with flush type cover plate.  Key switch to be located so that operator has full view of the curtain while it is being operated.  Wireless remote control unit optional.